It is a computer-dedicated program that measures and outputs the flatness and tension of the base of the diamond blade, and the machine that corrects the tension in the horizontal direction of the same machine according to the result is also used for the quality control of the product.

　　Main features

      1.The pressure of the pressure roller can be changed

　　2.With a foot switch, automatic pressure rotation

　　3.You can change the rotational speed of pressure theory

　　4.It is possible to install measuring positions with precision shafts on various sizes of flanges and install them on the tensioner

　　5.The cylinder with horizontal electronic sensor and vertical direction can adjust the pressure, can adjust the position at the same time

　　6.Automatically fix the substrate with air cylinder

　　7.Consists of measurement site, encoder, data transfer device, computer box, and pressure leveler

　　8.Using non-contact sensors to measure flatness and tension data

　　9.Completely uses the computer to measure the tension and flatness according to the actual time, the display on the monitor, and the output of the data

　　10.The data measured in the computer storage management can be printed out for quality assurance

　　Technical Information

　　1.Model CTMC 1/10 

　　2.Can measure size 100mm~1000mm

　　3.Maximum power consumption 4KVA 

　　4.Compressed air consumption About 5 liters/minute

　　5.Roller rotation speed (variable) 1~10m/min 

　　6.Equipment size 2200mm long,1100mm wide,1350mm high

　　7.Pressure (variable) 100kg~1400kg

　　8.Standard wheel arc Radius 40

　　9.Roller diameter 95mm 

　　10.Weight About 900kg

　　11.Can correct tension size 100mm~1000mm

　　Note:

       - This technical information only provides a summary of the product. Please note that all data is only a reference. 

　　- Special changes can be made according to the user's requirements.